-
VERSATILE LOAD HANDLING IN CONFINED SPACES
The compact E10 electric forklift truck from Linde Material Handling combines high manoeuvrability with a wide range of application options. With a lifting capacity of up to 1000 kilograms, it is the smallest model in its series but is suitable for a multitude of applications thanks to its optimal weight distribution. Its short wheelbase, compact construction with a width of just 828 millimetres and optimal steering concept enable stacking, transporting, order picking, loading and unloading, even in the tightest spaces. Automatic speed reduction when cornering also gives the E10 high stability.
-
MAXIMUM FLEXIBILITY, MINIMUM ENERGY CONSUMPTION
The three-wheeled E12 – E20 EVO trucks (including NEW Linde EG Models) allow for precision load handling in even the tightest of spaces. Thanks to the central pivot axle, the driver can turn up to 180 degrees with a single steering wheel movement. Two three-phase motors integrated in the front axle guarantee a powerful drive, offering outstanding acceleration and top speeds, powered by 48 or 24 volt batteries. Linde energy management ensures the batteries are used to full capacity, minimizing consumption. What's more, all E12 – E20 EVO forklift models can also be equipped with Lithium-Ion batteries that allow for efficient multiple-shift operation without the need to change batteries.
-
OPTIMAL MOBILITY AND STABILITY
The four-wheeled E16 – E20 EVO trucks allow for precision load handling in even the tightest of spaces – with even greater stability. Linde's innovative combi-axle allows the rear wheel turntable axis to be turned through up to 175 degrees, enabling the truck to maneuver on the spot without damaging the flooring. The electric forklift truck is equipped with the Linde compact axle: an integrated unit comprising two powerful drive motors, maintenance-free brakes, and performance parts installed directly on the axle that guarantee outstanding operational performance, while rapid battery changing and high truck availability is assured thanks to the optional on-board charging device. All this allows electric forklift trucks to offer maximum performance with outstanding energy efficiency. -
HIGH PERFORMANCE INDOOR SPECIALIST
Safe and quick in tight spaces
The E20 – E35 electric forklift trucks are ideally suited to indoor use. Their compact design and agility ensure high handling capacities even in tight spaces. In particular, the twin-motor front-wheel drive together with the Linde combined steering axle facilitates exceptional maneuverability. Thanks to a common platform for both electric and combustion engine trucks, the electric forklifts further impresses with improved ergonomics and by a generous driver workspace. The synergies of this platform means the electric forklift truck gives the driver significantly more space and an especially comfortable operating experience.
-
VISIBILITY WITH HIGH HANDLING PERFORMANCE
Revolutionizing operational visibility, the new Linde E20 – E35 R roadsters are powerful, versatile forklift trucks suitable for loads of between 2000 and 3500 kilograms. The driver has an all but unobstructed view of their work station, load, and surroundings thanks to the truck's unique design, that sees the cab roof connected directly to the lift mast via the tilt cylinder, avoiding the need for an A-pillar. The two powerful drive motors of the Linde compact axle, the maintenance-free brakes, and other smart performance parts form a single unit that gives this model series its optimal maneuverability and handling. What's more, the new Linde energy management system ensures low energy consumption.
-
OPTIMAL PERFORMANCE FOR DIVERSE APPLICATIONS
Suitable for loads between 3500 and 5000 kilograms, the Linde E35 – E50 series of powerful electric forklift trucks meet a wide range of specifications in order to optimally cater for customer requirements. These include, for example, compact models for areas where space is at a premium or tall trucks with a long wheelbase for tall, bulky loads. High handling performance is guaranteed, thanks to the two powerful three-phase motors of the Linde compact axle and dual pedal control, while features such as the overhead tilt cylinders, electronic traction control, and optional on-board high frequency charger bear testament to Linde's commitment to safety and cost-effectiveness.
-
ELECTRICAL POWER FOR HEAVY LOADS
The powerful Linde E60 – E80 forklift models are ideally suited for heavy loads weighing in at between 6000 and 8000 kilograms. The compact axle comprises two powerful drive motors that harness the power of maintenance-free brakes and smart integrated performance parts. Low energy costs, emission-free drive, and minimal maintenance costs all guarantee extremely cost-effective truck usage, while the Linde energy management technology ensures smart, transparent energy consumption. Plus, a display shows residual capacity to allow greater planning accuracy.
-
Work effectively and with a view in the high shelving
The Linde K man-up turret truck enables high turnaround capacity for order picking and handling processes in high-shelving warehouses. The powerful drive trains make this possible: The truck can move and lift at the same time. Also, even at high lift levels the speed remains high and a high level of residual lift capacity is available. Various assistance systems are available that help to navigate accurately through warehouse or to avoid obstacles. Not least, Linde System Control improves the process: Dependent upon the version, the system adjusts lift and travel speed according to the weight being transported. There are various versions or the mast, chassis, battery and cab for the very narrow aisle trucks that can be combined according to usage requirements. -
EFFICIENT MATERIAL FLOW IN PRODUCTION
The Linde Material Handling LT06 – LT20 series logistics trains are designed for packaged material transportation in indoor and outdoor areas, and under demanding industrial conditions. It boasts robust SE tires and a lift height of up to 200 mm, and it is possible to move loads of up to 2,000 kg per trailer, with up to 6 trailers. With different frame variants and trailer types, Linde logistics trains can be designed to adapt to specific production requirements. Thanks to the flat construction of the C-frame trailer, the transportation of long items is also possible. The trailers are available in C-frame and hanger frame variants, as well as in a platform construction.
-
ERGONOMIC PICKING ON TWO PALLETS
Equipped with long load arms and an additional liftable fork, the N20 LoL from Linde Material Handling enables the loading of two pallets at a back-friendly height in just one order picking cycle: First, the driver fills one pallet at an ergonomic height and attaches the second pallet vertically to the back of the fork. As soon as the first pallet is fully loaded, the driver lowers it onto the load arms and transports it in front of the fork. The operator then effortlessly transfers the second pallet onto the forks and starts the next job at a height that is also easy on the back. The position of the operator platform in front of the battery allows the operator to observe their surroundings while driving and to react to dangerous situations at an early stage. Thanks to the fully spring-loaded operator platform, the operator is optimally protected against shocks and vibrations during the journey. A robust steel bumper at the front of the order picker ensures improved protection of the forklift truck frame and operator platform.
-
QUICK AND SAFE TRANSPORT PROCESSES IN NARROW AISLES
The P20 electric tow tractor and the W04 platform truck feature a particularly slender design. Direct, responsive steering makes tight turns possible. As a result, these tow tractors are perfect for transport processes in narrow aisles and tight spaces. Ergonomic working conditions are ensured, for example thanks to the height-adjustable seat. The seat also folds up and down. This allows the driver to control the tow tractor from either a standing or seated position. The P20 and W04 can pull a maximum load of two tons. There is also a different version of the W04 model available with a platform that has a load capacity of up to 400 kilograms.
-
TRANSPORT HEAVY LOADS SAFELY AND QUICKLY
The P250 electric tow tractor from Linde Material Handling transports very heavy loads over medium and long distances quickly and safely. Amongst other things, this is made possible by powerful electric motors and smooth hydraulic steering, which makes the tow tractor easy to maneuver. The turning radius of the P250 is also very small. Hydraulic oscillating elements are positioned between the cab and the chassis. This construction prevents unevenness in the driving surface leading to powerful shocks in the cab. The solid, one-piece chassis surrounds the whole truck. It is particularly rigid and is specially constructed for the tough demands encountered in heavy-duty operation. The P250 electric tow tractor tows a maximum towing capacity of 25 tons and reaches a top speed of 25 kilometers per hour.
-
MANEUVER AND TRANSPORT MATERIALS IN NARROW AISLES SAFELY AND WITH AGILITY
Linde Material Handling's P30 electric tow tractor and platform truck are perfect for flexible and safe transport over short and medium distances; even (and especially) when there is very little space available. The truck features precise self-centering power steering that the driver safely controls using the ergonomic two-handled steering unit. In addition, the P30's compact design makes maneuvering narrow aisles easier. The powerful three-phase motor accelerates quickly to its maximum speed. For comfort and stability while driving, the trucks are equipped with an adjustable backrest and a full-suspension standing platform with a nonslip floor covering. The P30 has a maximum load capacity of three tons. It can reach a maximum speed of 10 kilometers per hour.
-
TRANSPORTS LOADS EFFICIENTLY AND QUICKLY THROUGH NARROW AISLES
Linde Material Handling's P30 C and P50 C electric tow tractors allow for efficient and fatigue-free work while transporting goods with load trains. The driver can also benefit from a new platform configuration: the control panel, adjustable backrest and driver standing platform form a u-shaped unit that is completely cushioned, improving comfort while driving. In addition, the electric 2-handled steering unit makes it easier to maneuver when space is limited. The powerful high-torque drive motor ensures high-performance handling. The P30 - P50 C electric tow tractors can pull a maximum load capacity of three (P30) and five (P50) tons.
-
EASY AND EFFICIENT TRANSPORT OF GOODS OVER SHORT DISTANCES
Linde Material Handling's P50 pedestrian tow tractor is designed especially for flexible transport with one or more tow hitches. Users benefit from the easy control, precise acceleration and effective braking that these trucks provide. In addition, the truck is very agile and easy to maneuver in narrow aisles or elevators where there is limited space. The tow tractors are designed to provide stability on three wheels, which allows operators to use the tow tractors on ramps or on uneven surfaces. Its maximum towing load is five tons. It can reach a maximum speed of 6 kilometers per hour.
-
HIGH THROUGHPUTS, EVEN IN THE SMALLEST OF SPACES
The P60 - P80 rider-seated tow tractors and W08 platform trucks from Linde Material Handling tow trailers with heavy loads and provide quick, safe and flexible processes. This allows the decoupled and spring-mounted suspension of all three wheels. It ensures quiet and safe travel. At the same time, the truck has high towing force and a small turning circle. Therefore, the throughput remains high even if there is only a small amount of space available in the warehouse. The driver benefits from a work station with lots of leg room, an adjustable driver’s seat and steering wheel, as well as intuitively arranged control elements. The P60 - 80 electric tow tractors and W08 platform trucks have a towing capacity of 6 to 8 tons. The top speed without load is 20 kilometers per hour.
-
TRANSPORT HEAVY GOODS PRECISELY AND QUICKLY
The W20 electric tow tractor from Linde Material Handling transports heavy loads quickly and safely. Its maneuverability is key to this; because of its compact dimensions, the platform truck is very versatile. The energy-saving and precise power steering makes any maneuver easier, even within a small space. This increases throughput. The truck has a robust design: The solid, one-piece chassis protects all the components during difficult heavy-duty operations. The cab is mounted on hydraulic oscillating elements and therefore decoupled from the chassis. In this way, few vibrations and road noises reach the driver. The W20 electric tow tractor can take up to two tons on its loading area. The maximum towing capacity is 4.5 tons.
-
ELECTRICALLY POWERED HIGH PERFORMERS
The first truly emission-free alternative
The X20 – X35 counterbalance forklift trucks from Linde Material Handling are the first electric forklifts whose high performance and robustness means they can be used as a genuine alternative to internal combustion (IC) trucks. Customers therefore enjoy absolute freedom of choice and are able to choose a quiet, emission-free alternative for even the most challenging applications, without having to allow for any loss of performance. The basis for all of this is the common platform developed by Linde for counterbalance forklift trucks, whether powered by internal combustion engines or electricity. This means that the X20 – X35 forklifts combine the best of two worlds: the characteristic output and power development of IC trucks and the dynamics, flexibility, and freedom from emissions offered by electric trucks.
-
MAXIMUM WORKING CAPACITY AT LOW SERVICE COSTS
The Linde H14 – H20 EVO IC trucks can go the distance even in the toughest conditions. The combination of the hydrostatic direct drive, robust engines, and the Linde Load Control facilitates both rapid and precise operation and exceptional handling performance. At the same time, service costs remain low, as the hydrostatic drive operates without a transmission, clutch, or drum brakes, meaning it is maintenance-free. Choose from a range of cost-effective, low-emission diesel, propellant gas, and natural gas engines.
-
RAPID TRANSPORT OF HEAVY LOADS OVER SHORT DISTANCES
The pallet lift truck M25 has a rugged construction and will not bend under heavy loads. Its steel chassis can take about 25 percent more weight than comparable models of this size. The hydraulics of the M25 are protected from dust and are well suited to long, hard working days, with a minimum of service. The drive wheels and rollers increase handling capacity with their low rolling resistance. The tiller also has a large steering angle on both sides. It's therefore easy to manoeuvre the M25 in a tight space, such as the truck loading bays. A broad tiller handle protects the hands from injury. The pallet lift truck M25 has a maximum load capacity of 2500 kg.
-
Effective Combination of Picking and Transporting
The electric pallet stackers ML 10 and MM 10 are extremely versatile. For example, they can be used as an ergonomic order picker platform or for transporting lighter goods. During order picking, the operator lifts his work surface to a comfortable height, which protects his back. During the transport of goods, an initial lift provides more ground clearance. Unevenness or ramps are not a problem. It is also important that different mast heights are available. This enables the truck to be precisely adapted to the respective area of application. Safety is ensured by the long tiller arm, hand guards and an effective parking brake. The electric pallet stackers ML 10 and MM 10 have a maximum load capacity of 1000 kilograms.
-
EFFICIENT AND SAFE ORDER PICKING FOR A WIDE RANGE OF REQUIREMENTS
The N20 B, N20 - 25 and N20 - 25 HP low-lift order pickers from Linde Material Handling enable a highly efficient and safe order picking process thanks to their unique truck architecture with the battery located between the operator platform and forks: With a maximum fork length of 2,400 mm, various types of loads up to 2,500 kilograms can be transported. The position of the operator platform ensures an optimum view of the warehouse environment during the journey. Using the 3 kW three-phase AC motor, the order pickers can accelerate up to 14 km/h, depending on the truck type, to enable fast transport even over long distances. The intuitive Linde steering wheel allows the driver to maneuver forwards and backwards with ease. The small turning circle facilitates maneuvering in narrow aisles. The fully spring-loaded operator platform compensates for vibrations and shocks, and ensures a low-load picking cycle.
-
COMFORTABLE AND COST-EFFECTIVE TO USE IN HIGH RACK WAREHOUSES
R10 - R16 B reach trucks are ideal for storage and removal at height and in narrow rack aisles. With negligible costs per pallet movement, they provide the necessary output for light to medium-weight tasks in the entry-level class. In addition to the extensive model range, the trucks can be extensively tailored with e.g. mast heights ranging from 2.9 to 7.7 meters. The trucks have a high residual load capacity and boast a high level of comfort for fatigue-free operation. In particular, a vibration-free driver's cabin and individually adjustable control elements help achieve this.
-
NETWORKED AND EASY TO SERVICE FOR MAXIMUM EFFICIENCY
The IC truck H20–H35 is powerful, easy to operate, robust, low-maintenance, and versatile. The forklift for loads between 2,000 and 3,500 kilograms is particularly well suited for high loads in multi-shift operation and assignments in the harshest outdoor conditions. Hydrostatic drive, dual pedal control, Linde Load Control, and optimal visibility ensure precise interaction between man and machine. Design details combined with intelligent assistance systems guarantee the highest possible levels of safety. The H20–H35 can be integrated into software systems, e.g. for fleet management, via wireless data transmission. The truck fulfills the latest EU 5 (2016/1627) exhaust emission regulations and it even undercuts the required emissions massively.
-
Agile and versatile thanks to the slim chassis
Whether storing or picking, distance transport or pallet transfer: The electro pallet stackers L10 - L12, with their slim chassis and good clear view masts make many maneuvers easier, especially where there is little space available. The operator profits from the tiller being mounted at a low point, which guarantees a safe distance from the stacker. There is also a creep speed function for very slow and tight maneuvers. Here the tiller is in an upright position. Overall the truck operates completely intuitively. All control elements are ergonomically arranged within the tiller head and provide for fatigue-free work. -
Weighing and transporting in one step
The pallet lift truck M25 Scale+ has a scale system with a tolerance of only 500 g. This means users are spared a trip to an external precision scale and save time when loading a truck. Linde also offers printers and memory cards if the user wants to store the measurement. For example, deviations from actual order quantities can be documented. The warp-free construction of the M25 Scale+ ensures high handling performance. In this way, the truck not only has an extraordinarily high load capacity for the class, but can also handle tough, continuous use with no need for servicing. The operator's hands are protected by a wide tiller handle. The M25 Scale+ pallet truck can transport weights of up to 2500 kg. -
ERGONOMIC ORDER PICKING ON A PALLET
The N16 Li order picker from Linde Material Handling enables a particularly high picking output: As the operator platform is positioned in front of the battery, the driver has a good view of the warehouse environment. Even in narrow aisles, the operator quickly maneuvers the truck into the desired position thanks to the small turning circle. With the aid of the lift, the forks can be raised to an ergonomic height of up to 790 mm for loading. With the optional Autolift, the truck automatically lowers the forks in proportion to the increasing height of the load. This eliminates the need for manual operation of the lift and the operator always picks orders at the optimum height without unnecessary interruption. The entire operator platform is spring-loaded and absorbs vibrations and shocks during transport.
-
EFFICIENT HANDLING OF ALL LOGISTICS TASKS THANKS TO A WIDE PRODUCT RANGE
The Linde R10 - R25-product line boasts a wide range of trucks for intensive applications in areas such as contract logistics, the food industry and food trade. The large number of model versions as well as the extensive standard and special equipment make it possible to perform a wide range of different logistics tasks. This includes mast heights up to 13.4 meters, narrow chassis for one-way shelving or the cold store protection able to operate at temperatures as low as - 30°C. In particular, the torsion-resistant lift masts as well as the optional electric linear drive with Dynamic Mast Control, which dynamically compensates for mast oscillation, makes these reach trucks ideal for safe and efficient operation at height. The trucks are also ideal for the double-depth storage of two pallets one behind the other. Ergonomic and individually adjustable control elements as well as a vibration-free driver's seat enable fatigue-free operation.
-
PERMANENT PEAK PERFORMANCE UNDER TOUGH CONDITIONS
The quality of the H40 – H50 IC trucks really comes to the fore in especially long and challenging applications. Powerful engines, a hydrostatic direct drive, and the Linde Load Control lift mast control system all ensure consistently high operational performance. At the same time, the truck only rarely needs to be taken off duty for servicing, as the bearings of the axles and tilt cylinders, for example, do not require maintenance. The same applies to the robust direct drive that operates without a transmission or drum brakes. Enhanced safety is assured thanks, among other things, to the Linde Protector Frame, that sees the roof and frame form a single robust unit.
-
Precision handling for high loads
The L14 - L20 pedestrian pallet stackers enable increasing handling performance with the powerful 2.3 kW three-phase motors and high load capacities. They are ideal for handling in narrow aisles or service lifts. There is an optional initial lift version for more ground clearance. The truck can transport loads up to 2000 kg safely over ramps and uneven ground. The delicate OptiLift lift mast control makes handling easy, because all lifting motions run very precisely. -
Flexible transport, lifting, and order picking
The pallet lift trucks M10 X and M10 XE can lift their forks via scissor lift to a height of 800 mm and have a very compact design. This is why these trucks are used flexibly in transport tasks, as mobile working platforms, or for occasional order picking in the tightest of spaces. Linde offers two versions: The M10 XE model has an electric lift drive. The operator doesn't have to use any strength to lift or lower the load. In the model M10 X, lifting is initiated manually by the operator using the tiller. The direction of movement can be changed using a single lever located on the handle. Both models have a rugged, warp resistant chassis and a reinforced tiller. The pallet lift truck with scissor lift M10 X/XE can carry and lift a maximum load of 1000 kg. -
PICKING AND TRANSPORTING ON TWO LEVELS
The N20 D and N20 D HP double-deck order pickers enable the simultaneous loading and transport of two pallets. Thanks to the ergonomic lift, the operator can also pick heavy goods at a height that is easy on the back. The two separate levels allow heavy and pressure-sensitive goods to be stowed and transported. The N20 D HP high-performance version is also optimally balanced with ground contact via five points and guarantees maximum stability even at speeds of up to 12 km/h. The operator platform is fully suspended on all forklift trucks and therefore reduces vibrations while driving.
-
REACH TRUCKS FOR HALLS AND YARDS
R14 – R20 G-series reach trucks are ideal for combined hall and yard use, that is to say, for transport operations in a changing environment, such as when loading and unloading trucks. Oversize super-elastic wheels, a vibration-damped drive unit, increased ground clearance as well as a vibration-free driver's cab ensure driving comfort and safety. This means that the versatile R14 – R20 G reach trucks enable low-vibration operation on uneven outdoor surfaces as well as efficient load handling in narrow rack aisles in warehouses. They can be adapted to the personal comfort requirements of every driver and are distinguished by powerful engines and numerous safety features.
-
DELIVER GOODS QUICKLY, SAFELY, AND EFFECTIVELY
The CiTi one pallet truck is ideal for rapid goods deliveries by truck and ensures efficient processes, even if the street or sidewalk are uneven and narrow. This is because of the wheels and drive of the pallet truck: The load wheels pivot, at the same time, the drive wheel with integrated motor has a large diameter. This helps the pallet truck to manage higher curbs. In addition, the compact truck can be maneuvered effortlessly, because the operator controls all movements and the brakes easily using their thumb on the EasyControl joystick. The parking brake stops the truck safely on gradients or on truck hoisting platforms. The electric pallet lift truck CiTi one has a lifting capacity of 500 kg.
-
IMPRESSIVE OPERATING PERFORMANCE – MINIMAL MAINTENANCE BREAKS
Safe handling and high handling performance – with the H50 – H80 IC trucks, the two go hand in hand. These robust trucks are ideally suited to heavy-duty applications with large loads. The protective driver's roof and frame form a single compact unit to ensure greater safety, while the slim profile of the lift mast improves the driver's vision. Powerful engines, the hydrostatic direct drive, and the Linde Load Control lift mast control system all guarantee high operational performance. Plus, the hydrostatic drive operates without a transmission, clutch, differential or drum brakes – reducing servicing time and further increasing handling capacity.
