N16 Li

ERGONOMIC ORDER PICKING ON A PALLET

The N16 Li order picker from Linde Material Handling enables a particularly high picking output: As the operator platform is positioned in front of the battery, the driver has a good view of the warehouse environment. Even in narrow aisles, the operator quickly maneuvers the truck into the desired position thanks to the small turning circle. With the aid of the lift, the forks can be raised to an ergonomic height of up to 790 mm for loading. With the optional Autolift, the truck automatically lowers the forks in proportion to the increasing height of the load. This eliminates the need for manual operation of the lift and the operator always picks orders at the optimum height without unnecessary interruption. The entire operator platform is spring-loaded and absorbs vibrations and shocks during transport.

Description

Product Overview

Safety

The N16 Li order picker has a three-part braking system that adapts to both the environment and the current load weight: The electromagnetic service brake is coupled with a dead man’s switch and the emergency-stop button. A hydraulically assisted brake increases braking power as the load weight increases. In addition, the truck stops automatically when the drive control is released. When cornering, the N16 Li reduces its speed to protect the driver and goods. In addition, an optional load backrest stabilizes the load, ensuring the safety of the operator. The self-centering power steering requires only a small amount of steering angle, reducing operator movement within the operator platform. Additional options such as a front LED and Linde BlueSpot™ maximize safety in the warehouse.

Three-part brake system
Dead man’s switch and emergency-stop button
Reduction of speed in curves
Self-centering steering

Ergonomics

The operator platform with a low access height of 13.7 centimeters allows easy entry and exit. All contours of the platform are rounded and numerous compartments and holders provide storage space for necessary equipment. Thanks to the lifting forks, the operator can pick orders at a back-friendly height. This can optionally be supplemented by the Autolift, which automatically adjusts the height of the forks according to the load height. For short distances, the operator conveniently controls the forklift truck using the pedestrian function. Both the intuitive Linde steering wheel and the backrest with fold-out seating support are optionally height-adjustable. In addition, the operator platform is fully spring-loaded and reduces vibrations and jolts while driving. The clear symbols on the control elements allow new drivers to be quickly familiarized with the system.

Low entry height
Rounded contours
Compartments and holders for equipment
Pedestrian operation
Intuitive Linde steering wheel
Fully suspended operator platform

Handling

Powered by a 3 kW three-phase AC motor, the N16 Li quickly accelerates to a top speed of 12 km/h. The truck’s four-point contact with the ground ensures high stability. An initial lift function facilitates transport over ramps and bumps. Thanks to the optionally available lithium-ion battery, the driver can use their breaks to recharge the truck, leading to less downtime. A multifunction display keeps the driver updated about the current charge status of the order picker. Intuitive control symbols on the steering wheel show the functions of the most important commands at a glance. The optional Autolift function eliminates unnecessary movements by automatically lifting and lowering the forks.

Powerful 3 kW three-phase AC motor
Four contact points with the ground
Initial lift function for transport over ramps
Lithium-ion battery
Clear multifunction display

Service

The N16 Li requires only minimal maintenance: The truck runs for up to 1,000 operating hours without a service check. The three-phase AC technology is maintenance-free and there is no need for the brakes to be readjusted. All serviceable components are easily accessible to the technician after removal of a service panel. Essential truck parameters can be read out via a CAN bus connection using a laptop. A robust cast steel bumper protects the spring-loaded operator platform and thus reduces collision damage.