• OPTIMAL MOBILITY AND STABILITY

    The four-wheeled E16 – E20 EVO trucks allow for precision load handling in even the tightest of spaces – with even greater stability. Linde's innovative combi-axle allows the rear wheel turntable axis to be turned through up to 175 degrees, enabling the truck to maneuver on the spot without damaging the flooring. The electric forklift truck is equipped with the Linde compact axle: an integrated unit comprising two powerful drive motors, maintenance-free brakes, and performance parts installed directly on the axle that guarantee outstanding operational performance, while rapid battery changing and high truck availability is assured thanks to the optional on-board charging device. All this allows electric forklift trucks to offer maximum performance with outstanding energy efficiency.
  • MAXIMUM FLEXIBILITY, MINIMUM ENERGY CONSUMPTION

    The three-wheeled E12 – E20 EVO trucks (including NEW Linde EG Models) allow for precision load handling in even the tightest of spaces. Thanks to the central pivot axle, the driver can turn up to 180 degrees with a single steering wheel movement. Two three-phase motors integrated in the front axle guarantee a powerful drive, offering outstanding acceleration and top speeds, powered by 48 or 24 volt batteries. Linde energy management ensures the batteries are used to full capacity, minimizing consumption. What's more, all E12 – E20 EVO forklift models can also be equipped with Lithium-Ion batteries that allow for efficient multiple-shift operation without the need to change batteries.

  • VISIBILITY WITH HIGH HANDLING PERFORMANCE

    Revolutionizing operational visibility, the new Linde E20 – E35 R roadsters are powerful, versatile forklift trucks suitable for loads of between 2000 and 3500 kilograms. The driver has an all but unobstructed view of their work station, load, and surroundings thanks to the truck's unique design, that sees the cab roof connected directly to the lift mast via the tilt cylinder, avoiding the need for an A-pillar. The two powerful drive motors of the Linde compact axle, the maintenance-free brakes, and other smart performance parts form a single unit that gives this model series its optimal maneuverability and handling. What's more, the new Linde energy management system ensures low energy consumption.

  • HIGH PERFORMANCE INDOOR SPECIALIST

    Safe and quick in tight spaces

    The E20 – E35 electric forklift trucks are ideally suited to indoor use. Their compact design and agility ensure high handling capacities even in tight spaces. In particular, the twin-motor front-wheel drive together with the Linde combined steering axle facilitates exceptional maneuverability. Thanks to a common platform for both electric and combustion engine trucks, the electric forklifts further impresses with improved ergonomics and by a generous driver workspace. The synergies of this platform means the electric forklift truck gives the driver significantly more space and an especially comfortable operating experience.

  • OPTIMAL PERFORMANCE FOR DIVERSE APPLICATIONS

    Suitable for loads between 3500 and 5000 kilograms, the Linde E35 – E50 series of powerful electric forklift trucks meet a wide range of specifications in order to optimally cater for customer requirements. These include, for example, compact models for areas where space is at a premium or tall trucks with a long wheelbase for tall, bulky loads. High handling performance is guaranteed, thanks to the two powerful three-phase motors of the Linde compact axle and dual pedal control, while features such as the overhead tilt cylinders, electronic traction control, and optional on-board high frequency charger bear testament to Linde's commitment to safety and cost-effectiveness.

  • ELECTRICAL POWER FOR HEAVY LOADS

    The powerful Linde E60 – E80 forklift models are ideally suited for heavy loads weighing in at between 6000 and 8000 kilograms. The compact axle comprises two powerful drive motors that harness the power of maintenance-free brakes and smart integrated performance parts. Low energy costs, emission-free drive, and minimal maintenance costs all guarantee extremely cost-effective truck usage, while the Linde energy management technology ensures smart, transparent energy consumption. Plus, a display shows residual capacity to allow greater planning accuracy.

  • MAXIMUM WORKING CAPACITY AT LOW SERVICE COSTS

    The Linde H14 – H20 EVO IC trucks can go the distance even in the toughest conditions. The combination of the hydrostatic direct drive, robust engines, and the Linde Load Control facilitates both rapid and precise operation and exceptional handling performance. At the same time, service costs remain low, as the hydrostatic drive operates without a transmission, clutch, or drum brakes, meaning it is maintenance-free. Choose from a range of cost-effective, low-emission diesel, propellant gas, and natural gas engines.

  • PERMANENT PEAK PERFORMANCE UNDER TOUGH CONDITIONS

    The quality of the H40 – H50 IC trucks really comes to the fore in especially long and challenging applications. Powerful engines, a hydrostatic direct drive, and the Linde Load Control lift mast control system all ensure consistently high operational performance. At the same time, the truck only rarely needs to be taken off duty for servicing, as the bearings of the axles and tilt cylinders, for example, do not require maintenance. The same applies to the robust direct drive that operates without a transmission or drum brakes. Enhanced safety is assured thanks, among other things, to the Linde Protector Frame, that sees the roof and frame form a single robust unit.

  • IMPRESSIVE OPERATING PERFORMANCE – MINIMAL MAINTENANCE BREAKS

    Safe handling and high handling performance – with the H50 – H80 IC trucks, the two go hand in hand. These robust trucks are ideally suited to heavy-duty applications with large loads. The protective driver's roof and frame form a single compact unit to ensure greater safety, while the slim profile of the lift mast improves the driver's vision. Powerful engines, the hydrostatic direct drive, and the Linde Load Control lift mast control system all guarantee high operational performance. Plus, the hydrostatic drive operates without a transmission, clutch, differential or drum brakes – reducing servicing time and further increasing handling capacity.

  • HANDLE HEAVY LOADS PRECISELY AND SWIFTLY

    The H100 – H180 D IC trucks can transport even the heaviest of loads precisely, swiftly, and cost-effectively, securing a competitive advantage in terms of handling performance. All this is made possible by Linde's hydrostatic drive, which allows heavy trucks to be moved with millimeter precision. The driver can quickly and smoothly shift between backward and forward movement, while modern diesel engines guarantee high torque and low fuel consumption.

  • COST-EFFECTIVELY TRANSPORT HEAVY LOADS

    The HT100 – HT180 Ds IC trucks are fast and efficient when handling heavy loads: a fact guaranteed by the well coordinated combination of modern diesel engines, transmission, and hydrodynamic drive. This technology ensures exceptionally strong handling performance, particularly for transport over long distances. What's more, drivers of trucks in this class benefit from excellent all-round visibility, as essential components, such as the mast and counterbalance, have been designed for optimal vision.

  • EFFICIENT MATERIAL FLOW IN PRODUCTION

    The Linde Material Handling LT06 – LT20 series logistics trains are designed for packaged material transportation in indoor and outdoor areas, and under demanding industrial conditions. It boasts robust SE tires and a lift height of up to 200 mm, and it is possible to move loads of up to 2,000 kg per trailer, with up to 6 trailers. With different frame variants and trailer types, Linde logistics trains can be designed to adapt to specific production requirements. Thanks to the flat construction of the C-frame trailer, the transportation of long items is also possible. The trailers are available in C-frame and hanger frame variants, as well as in a platform construction.

Go to Top